Changes to the purpose and scope of ASHRAE/IESNA Standard 90.1, as well as new lighting requirements, are being proposed.
ANSI/ASHRAE/IESNA Standard 90.1-2007, Energy Standard for Buildings Except Low-Rise Residential Buildings, provides minimum requirements for the energy-efficient design of buildings, except low-rise residential buildings.
The mooted changes relate to the purpose and scope of the standard. The proposed modification addresses applications not covered in the existing standard scope, such as requirements for laboratories, data centre cooling and kitchen exhausts.
It would also permit the 90.1 committee to address technologies such as computer equipment and refrigerated casework, and would extend existing requirements for envelope, space cooling and lighting to a larger group of spaces where energy is consumed.
“ASHRAE is committed to substantially reducing energy use in buildings,” said committee vice chair Mark Hydeman. “This addendum is a critical step toward achieving that goal.
For example, it requires all cooling and heating equipment that operates under standard conditions to comply with the existing minimum efficiencies of the standard regardless of the facility that they are in. Manufacturing and process environments often operate at much longer hours than office buildings and retail facilities, which served as the basis for the lifecycle cost analysis of the minimum efficiencies.”
Standard 90.1 currently addresses the design and construction of buildings. The proposed addendum would add operation and maintenance, which allows incorporation of industry standards such as ASHRAE/ACCA Standard 180-2008, Standard Practice for Inspection and Maintenance of Commercial Building HVAC Systems. The addendum also incorporates utilisation of on-site, renewable energy resources.
“By including on-site and renewable energy resources in the scope, an appropriate mechanism was created for future requirements, as well as credits for these energy resources not currently provided in the standard,” said Hydeman.
Four other proposed addenda – ‘ar’, ‘as’, ‘au’ and ‘av’ – are also under review. Proposed addendum ‘ar’ revises an earlier version of the standard where expanded exterior lighting power limits were put in place, but details were not included on calculating installed power and its comparison to the limits. Addendum ‘av’ would require that, in all spaces where alterations take place, all requirements of Section 9 are met, not just the lighting power density requirements.